CM-Mastercase-5-28

Cooler Master MasterCase 5 PC Case

SKU: MCX-0005-KKN00

At heart, the MasterCase 5 advocates a new relationship that binds component makers and users closer together. Its elegantly smooth, flexible FreeForm Modular System supports multiple outlooks, allowing you to upgrade rather than entirely replace your case as your needs change over time. Go with either basic dual top handles and standard door of the MasterCase 5 or an elevated mesh top cover of the MasterCase Pro 5.

Categories: 

Tags: , , , ,

[nextpage title=”Gallery” ]

[/nextpage] [nextpage title=”Specification” ]
ProductMasterCase 5MasterCase Pro 5
PNMCX-0005-KKN00MCY-005P-KWN00

Size (WxHxD)
All235x512x548 mm235x512x548 mm
Body235x460x460 mm235x460x460 mm
Mother Board SupportATX,m-ATX, m-ITXATX,m-ATX, m-ITX
Expansion Slots77

Drive Bay
5.25” ODD22
3.5” HDD25
2.5” SSD2+22+5

Electronics
I/O PortU3 x2, AudioU3 x2, Audio
Fan Speed ControlN/AN/A

Pre-Installed Fans
Front140mm x1140mm x1
TopN/AN/A
Rear140mm x1140mm x1

Fan Support
Front120/140mm x3120/140mm x3
Top120/140mm x2120/140mm x2
Rear120/140mm x1120/140mm x1

Water Cooling Support
Front240/280mm, up to 40mm for fan+ radiator240/280mm, up to 40mm for fan+ rad
TopN/A240/280mm, up to 64mm for fan+ rad
Rear120/140mm x1120/140mm x1
CPU Air Cooling Support190mm/7.5inches190mm/7.5inches

VGA Card Support
w/ 3.5” HDD Cage296mm/11.7inches296mm/11.7inches
w/o 3.5” HDD Cage412mm/16.2inches412mm/16.2inches
Cable Management25mm25mm
Dust FiltersFront/Top/BottomFront/Top/Bottom

Remark
No Top Cover
No Front Door
W/ Top Cover
Top Water Bracket
Side Window
[/nextpage] [nextpage title=”Review Links” ]

From Hardware BBQ:

The aftermarket upgrades are pretty less for now. But you’re getting almost all of them on the MasterCase Pro 5. This idea will work if Cooler Master has set of accessories that are not available with anyone of the standalone variants, and not having a fan controller is a letdown. Those threaded access on the back of the motherboard tray is practically trolling for not waiting for the MasterCase Maker. Having a wheel aftermarket add-on will be a pretty neat add-on for those who keep their cases under the table. I see a lot of setups with triple monitor/system setup.Dragging the case out with all the weight of the components is going to be a pain. Feet panels are removable, so maybe Cooler Master has something in the works- or plan to- or already working on it after pointing this out??? If you’re looking out for ideas Cooler Master- magnetic LED strips with flexible connector

[/nextpage] [nextpage title=”Purchase Links” ]
These are affiliate links where we get a small referral fee if something is purchased from the links above. While this doesn’t add any extra cost from non-affiliated links, it help us to gain funds to pay the bills for hosting and get required resources for testing. If our reviews helped you, buying from our affiliate links helps a lot!

India

NA


United States


United Kingdom


France

NA
[/nextpage]