Home / PC H/W Reviews / Core PC Components / PC Enclosures/Cooling Reviews / Cooler Master MasterBox MB500 PC Case Review
Metal base for the tempered glass panel

Cooler Master MasterBox MB500 PC Case Review

  1. About the Masterbox MB500…
  2. PC Case Overview- External
  3. PC Case Overview- Internal
  4. Compatibility Check and Installation Experience
  5. Setup images, Illumination Effects and Test Setup
  6. Performance Testing- Sound and Temperature
  7. Conclusion
  8. Online Purchase Links
  9. View All

Conditions and Components used during testing

Room Conditions:

Room sound level: 50.3 dB
Room temperature: 32c

System setup:

GPU FAN @ 75% (3144 RPM)

CPU fan speed @ 100%
CPU_FAN 1: 1461 RPM
CPU_FAN 2: 1461 RPM

Case fan speed @ 100%
FRONT FAN: 1182
REAR FAN: 1094 RPM

Temperature and sound levels are recorded 36 hours after assembling.

Sound Testing

Temperature Testing

The CM MB500 Mastercase is the first case where I am including such tests. With standard components staying that way, it made sense. As of now, there are no comparative numbers but it should change in the future. As you’ll notice, opening the front panel to allow (or thinking it allows) more airflow didn’t make a lot of difference to the graphics card temperatures.

12 comments

  1. Sir question is this support the new cooler master vertical mount GPU with no cutting grills?

  2. On this case? No, it does not. Many reviewers proved it vertical GPU mounts do not have a bad airflow.

  3. Where do I buy this please tell me

  4. It is already there in PC hardware stores nationwide.

  5. Are the case fans noisy and annoying under load ?

  6. That testing is done in the 6th page. In a room, it doesn’t really make a difference in a closed case setup. These are rifle bearing fans. Rifle bearing fans are quieter than sleeve bearing but with lifespan somewhere close to a ball bearing fan.

    The dB testing link is here: https://www.hardwarebbq.com/cooler-master-masterbox-mb500-pc-case-review/6/

  7. hello, i just build in this case but the rgb lights in the fan dont turn on, they are coneccted to he rgb controller, do you know what i could do? thanks

  8. They’re probably defective. You can ask for a replacement. Just send them the photographs of the controller module and the lack of lighting to their support at the same time so that they’ll proceed for a replacement.

  9. Just wondering will a 240mm radiator still fit with 2xssd drives installed in the front

  10. Just a question will a 240mm aio fit infront with 2xssd installed

  11. 120/240/360? Yes. 140/280? No.

    You could just install the SSDs over the PSU shroud since it has mounts and cut-outs for the cable.

  12. Thank you i just di.Not a fan of the bottom mounted ssd bays as the cables are away from the case but it works.Was a mission to remove my bottom fan but moved them up at top.I am just waiting on the courier to deliver the aio.

Leave a Reply

Your email address will not be published. Required fields are marked *

*